Pulser | Communication 1 | |||
Pulse Voltage | 145V | LAN (1000BT, Gigabit Ethernet) | 10 MB/s | |
Pulse Type | Negative Square | |||
Pulse Width | 10~1000 ns | SYSTEM | ||
Pulse Width Resolution | 4 ns | Configurations | 16ch, 32ch, 128ch | |
Maximum PRF | 20 kHz | Channel Mode | Parallel or Multiplexed | |
A-Scan Resolution | 8, 12, 16 bits | |||
Receiver | A-Scan Mode | Lin, Log (8 bits resolution) | ||
Receiver Sensitivity | 12 bit | Size 16ch | 110 x 70 x 40 mm for bare electronics | |
Receiver Gain Range | 15~99 dB | Size 32ch | 110 x 70 x 50 mm for bare electronics | |
Receiver Bandwidth | 384 kHz to 20MHz | Weight | <300g for bare electronics | |
Receiver DAC (digital) | 36 dB | Temperature Sensors | YES | |
Open Source SDK | YES (Fully Documented API) | |||
GATES | Software Languages | C++, C#, LabVIEW, | ||
Number of Gates | 4 | MATLAB, and more | ||
Interface Echo Tracking (see below) | YES | Power Consumption 2 | <15W (16ch) | |
Synchronization (same cycle) | YES | <23W (32ch) | ||
Synchronization (other cycle) | YES | |||
Mode | Max, Min, ABS, Zero before, Zero after | I/O Management | ||
Encoders | X,Y | |||
Signal Processing | Encoder Modes | Quadrature,Quadrature4edges | ||
FIR Filter | Up to 64 taps | Direction Count, Forward Backward | ||
A-Scan Sampling | 100 MHz | Synch In | Pulse Trig, Sequence Trig, Encoders | |
Decimation | 50 MHz, 33, 25, 16.65, 14.28, 12.5... | Synch Out | Pulse Trig, Sequence Trig | |
Compression | YES | Time Stamps | Yes (Position and Line Speed) | |
A-Scan Video | YES | Pin Assignments | Programmable | |
Acquire All A-Scans | YES | Number I/O | 6 Inputs, 6 Outputs | |
A-Scan Length | 32 k Points in Multiplexed Mode | 2 Measured at a 2 kHz PRF with a 5 MHz probe. All channels enabled. | ||
10 k Points in Parallel Mode | ||||
1 The maximum data rate can vary according to PC, OS settings, and the software environment. |