Key points :
•16/16; 32/32; 64/64, 16/128; 32/128 channel configuration (extendable)
•manage probes from 0.5to15MHz
•USB or LAN (both available)
•Up to 20KHz PRF (*)
•Abundance of signal and data processing features
•Compact (16/16 within only 110x70x40mm), easy to create a rugged solution
•No need to develop an application. Delivered with the minimum needed
•Simple and high level API Windows XP, Seven, Labview, Matlab, with examples and monitoring tools
Beam former:
o 16/16; 32/32; 64/64, 16/128; 32/128 channel configuration
o Extendable to128/128 or256/256 channel configuration
o Delay resolution at 5ns, with delay range up to 40µs with DDF
o Pulser 140V
o Up to 20KHz PRF (*)
Processing
o A-scan in8,12,16bits,or Log scale
o Ascan sampling rate at 100MHz
o Fully featured signal processing:
•FIR and IIR filters
•RF, FW, negative rectified, positive rectified, smoothing
•A-scan recording, A-scan and B-scan video
o 4gates with all mode
o Echo tracking (surface and back-wall)
o Up to16,000 cycles per sequence
Interface
o USB or LAN (both available as standard package)
o Simple API Windows XP, Seven, Labview, Matlab, with examples
o High level Windows API XP, Seven; Monitoring tools
o General Setting and acquisition Software
o SAFT application
Overall features
oFocusing
Conventional focusing in transmission
Conventional focusing in reception
Dynamic depth focusing in reception
oSector scan
A few angles
Complete sector scan
Smooth sector scan
oElectronic scanning
oA-scan
Conventional A-scan: RF, FW, HWP, HWN
Peak A-scan
Smoothing
o B-scan (end-view)
o C-scan (top view)
o D-scan (side view)
o S-scan
oFiltering
FIR to avoid that the phase of the signal is affected
IIR to provide extreme efficiency
o Averaging
o Advanced phased array
INTEGRATION
•Available in DC version with only 1power supply required (24V:from19V to35V)
•Also available in AC version with all standards (100~250V)
•Very compact (’110x70x40mm for a ’16/16 version, up to 110x70x80mm for a ’64/64 version, for less than ’500 grams):
-You can place it on scanners and robots near the probe
-No need to pay for expensive cables
-Can be used as a portable system attached to the arm
-You can place it inside any case you want
-Rugged design for any application (easy to air-tight and water-proof)
•Save on shipping! Consider leaving an OEMPA unit at each inspection site, rather than sharing between multiple places.
OPTIONS
•1000 BT
-The 100/1000BT standard LAN connection allows to work with a5MB/s data rate
-With the High speed option, the data rate increases up to more than12MB/s according to the stream size
•Standard I/O board
-6 inputs
-6 outputs
-RF out
•Advanced I/O board
-8 inputs
-8 outputs
- Ascan RF output
